88
88
Problem
Probable Cause
Possible Solution
After receiving, answering and ending
a second call, the multifunction display
shows
INCOMING CALL PRIVATE
NUMBER
, instead of the phone number
corresponding to the first call
Models: Nokia
®
6600
Sometimes when trying to use this phone
with
Blue&Me™ Nav
, using the
ß
button, the message
SEARCHING
CONNECTION
is displayed before
the connection is implemented
Models: Nokia
®
6600
No ring tone is produced when receiving
a second incoming call
Models: Nokia
®
6820
Pressing
ß
for over 1 second to
reject a second incoming call, disconnects
also the current phone conversation
Models: Nokia
®
6820
When answering an incoming call using
the mobile phone keypad, sometimes the
mobile phone disconnects from
Blue&Me™
Nav
and the phone conversationhas to be
continued on the mobile phone instead of
the hands-free feature
Models: Nokia
®
7610
–
Wait for connection.
To prevent recurring of this problem,
reset the mobile phone by turning it off
and on again
The ring tone of the second incoming
call will always be lower than normal.
Try to turn up the ring tone volume
–
Answer the incoming call by pressing
ß
In this specific case, the system is not
able to identify which phone call is
ended
The connection between this mobile
phone and
Blue&Me™ Nav
sometimes may deactivate
On this mobile phone the ring tone of
the second incoming call is very low
This behavior depends on the specific
features of this mobile phone
For certain software versions of this
mobile phone, answering a call using
the keypad will automatically
disconnect the mobile phone from the
hands-free kit
