Alfa Romeo Blue & Me Nac, User Manual

Page: 50 / 106

49 49
You can create a pairing relationship using
the
USER PAIRING option in the SET-
TINGS menu.
?
To create a pairing relationship using
manual interaction, proceed as fol-
lows:
Press
ß
to open the Main Menu, then
select SETTINGS by pressing SRC
or
ß
.
Select USER PAIRING and then
press SRC or ß . The system will start
the pairing procedure.
The system shows the mobile phone
pairing PIN on the instrument panel
display and repeats it. Please note
that this is a PIN used just for this op-
eration, it is not your SIM PIN.
For the next two steps, consult your
mobile phone owner’s manual about
Bluetooth ® pairing.
On your mobile phone, query for de-
vices equipped with
Bluetooth
®
wireless technology that are within
range (this option on your mobile
phone might be called Discover, New
Device, etc.). View the list of
Blue-
tooth ® wireless technology enabled
devices and select “ Blue&Me ”
(item that identifies Blue&Me™
Nav on your car).
When prompted by the mobile phone,
enter the PIN number shown on the
instrument panel display. If pairing is
successful, the system will say “
Con-
necting ” and then the display will
show the paired mobile phone ID.
It is of vital importance to wait until
this confirmation message is displayed
since pressing
ß or
&
at this time
may cancel the pairing process. If pair-
ing fails, an error message will be dis-
played and the pairing procedure shall
be repeated.
At first pairing, the system will say
“
Welcome ” immediately after con-
necting. This message will no longer
be heard at next pairing procedures.
The system asks if you would like to
copy your paired phone phonebook.
It is recommended to copy it. To start
copying the phonebook, press
SRC
or ß ; otherwise press
&
. You can
download your phonebook at a later
time using the menu option SET-
TINGS , USER DATA
,
PHONE-
BOOK .
For certain mobile phones the phone-
book is not copied automatically, in
this case you must send the contacts
in your mobile phone phonebook to
the hands-free phone system using
your mobile phone keypad. If the
hands-free phone system asks you to
do this, then perform this procedure
following the instructions specific to
your mobile phone and press
ß when
you have finished.
}
Or, using voice interaction:
Press
ô
and pronounce “ Settings ”,
wait shortly for feedback and then
pronounce “
Pairing ”.
The system shows the mobile phone
pairing PIN on the instrument panel
display and repeats it.
For the next two steps, consult your
mobile phone owner’s manual about
Bluetooth ® pairing.