AUTOMATIC REGULATION
Stove heating output is adjusted with output controller which automatically
adjusts the moving of controller flap away, depending on the adjustment of
control button (Figure 5, Item 1) and the height of water temperature.
Controller button has several positions designated on the stove frame, as follows:
Position of controller button
0
3
4
5
7
9
Water temperature in the stove
Closed controller
30 40 50 70 90
Figure 5
1. Controller button
2. Special key or screwdriver
Air cover (flap) in the output controller system completely controls combustion air
supply if other openings are closed.
SECONDARY AIR
Secondary air control is shown in Figure 6. Secondary air is adjusted with rod on
the inner side of firebox door. On the inner side of firebox door there is a clear
designation 0 – 1. If the rod is moved in the direction of 0, secondary air volume
is decreased, while it is increased in the direction 1.
Figure 6
HEATING FLAP
Heating flap is moved when button (Figure 7) located above the oven door is
actuated. When this button is not pressed heating flap is open. When the button
is not pressed, heating flap is closed. This button is used to shorten the ways of
flue gases during firing. Heating flap should be opened only in the stage of
lighting the stove. When the stove is satisfactorily fired, after 15 – 20 minutes, the
