Here will explain all web page functions
In system page
System
Settings
Password Setting
Backup & Restore
Syslog Settings
Firmware Upgrade
Operation Mode:
Bridge: bridge all interfaces together and disabled DHCP server (dnsmasg) & firmwall
Router: NAT and DHCP server enable
To change the password to access the SoLo51 web management
To Download the config. Or Upload the config. Setting file
Remote Syslog:
IP address and port of the remote logging host.
Leave this address blank for no remote logging. The port is set to 514 by default
To upgrade the latest firmware
Time Settings: NTP server to obtain the correct time from the time source and adjust
the local time in each connecting computer
Web Interface setting: allow to change the Language
