31369765EN-07
5
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
1 Important information
1.1 Disclaimer
This Instruction Manual applies to all Optigo FMC air cooler products. Manual must be carefully
examined and instructions should be followed up at all times.
Alfa LU-VE does not accept liability for any damage resulting from non-compliance to the instruc-
tions as given in the manuals and order-related documents.
1.2 Intended use
Air coolers are partly completed machinery according to Machine Directive 2006/42/EC and are
intended for incorporation in cooling systems. Declarations of Incorporation are available on
. The product is built according to the following standards:
• PED 2014/68/EU
• Safety of Machinery EN 60204-1
• Directive 2014/30/EC and subsequent modifications. Electromagnetic compatibility.
• Low Voltage - Reference Directive 2014/35/EC
However it is forbidden to operate our equipment before the machine incorporating the products or
making part thereof has been declared to be in conformity with the EC Machine Directive.
1.3 Where to find product information
Detailed technical data for individual product models are available in order related documents,
on the product label and in product data sheets. Comprehensive technical information for all
Alfa LU-VE air heat exchanger products is available on-line on
. This includes:
• Product manuals
• Instruction manuals
• Product leaflets & brochures
• Product data sheets (selection software)
• Dimensional drawings
• Certificates
Alfa LU-VE offers world-wide service and support. In case of any questions
or uncertainty please contact your local Alfa LU-VE representative.
Contact addresses are available at
1.4 Warning symbols
The following warning symbols are used in Alfa LU-VE instruction manuals.
General warning.
Risk of malfunctioning and/or
damage.
Hot surfaces. Danger of burns.
Wear adequate protection.
Moving parts. Danger of injuries.
Do not operate without protection guard mounted.
Sharp surface. Danger of cutting injuries. Wear
adequate protection.
Overhead load.
Never stand or walk below the load.
Mandatory prescription.
Follow instructions as provided.
Forklift trucks or other logistic vehicles.
Stay clear of working space.
Risk of injuries.
Wear head protection.
Electrically powered component. Switch off power
supply before any maintenance or installation
activity.
Risk of injuries.
Wear safety footwear.
Cold parts. Danger of frostbite injuries.
Wear adequate protection.
Risk of injuries.
Wear protective gloves.
