Alfa Network 30 Next, Instruction Book

Page: 21 / 35

19
(A)
(B)
(C)
z
Carefully mark buttonhole length on fabric.
Place the fabric under the foot with the
buttonhole marking running toward you.
x
Move the slider (A) toward you so that the
top mark (C) on the slider meets the start
mark (B). Line up the markings on the foot
with the top mark on the fabric.
NOTE:
The scale on the slider is engraved in
centimeters.
c
Set the pattern selector dial at “ ”.
Sew forward until you reach the front
marking of your buttonhole.
Stop sewing at a left stitch.
v
Set the pattern selector dial at “ ”.
Sew 5 stitches. Stop sewing at a right
stitch.
b
Set the pattern selector dial at “ ”.
Sew until you reach the back marking of
the buttonhole.
Stop sewing at a right stitch.
n
Set the pattern selector dial at “ ”.
Sew a few bartacks and raise the needle
from the fabric.
Set the pattern selector dial at a straight
stitch.
Sew a few locking stitches.
m
Remove the fabric from the machine and
cut the sewing thread. Insert a pin inside
the bartack.
Then cut the opening with a seam ripper.
Take care not to cut the stitches.
5
3
4
q w e
r t
z x
c v b
n
m
Buttonhole
q
Stitch pattern: (BH)
w
Presser foot: Sliding buttonhole foot
e
Thread tension: 1 to 5
r
Stitch length:
t
Stitch width*: 5
1
4
2 4
2
3
1
4
2
4
2
3