2 Safety
All warnings in the manual are summarised on this page.
Pay special attention to the instructions below so that serious personal injury and/or damage to the valve are avoided.
2.3
Safety precautions
Installation
Always read the technical data thoroughly.
Always release compressed air after use.
Never touch the clip assembly or the actuator piston rod if the actuator is supplied with compressed air
(see the warning label).
Never stick your fingers through the valve ports if the actuator is supplied with compressed air.
Operation
Always read the technical data thoroughly.
Never touch the clip assembly or the actuator piston rod if the actuator is supplied with compressed air
(see the warning label).
Never pressurise air connections (AC1, AC3) simultaneously as both valve plugs can be lifted (can
cause mixing).
Never touch the valve or the pipelines when processing hot liquids or when sterilising.
Never throttle the leakage outlet.
Never throttle the CIP outlet, if supplied.
Always handle lye and acid with great care.
Maintenance
Always read the technical data thoroughly.
Always fit the seals correctly (risk of mixing).
Always release compressed air after use.
Always remove the CIP connections, if supplied, before service.
Never service the valve when it is hot.
Never pressurise the valve/actuator when the valve is serviced.
Never stick your fingers through the valve ports if the actuator is supplied with compressed air.
Never touch the clip assembly or the actuator piston rod if the actuator is supplied with compressed air
(see the warning label).
6
Summary of Contents for Unique Mixproof LP
Page 2: ......
