Maintenance and repair
(continued)
Turbine and Gear Assembly
Disassembly:
1.
Remove Circlip (pos. 11) and lift off the Gear wheel (Pos. 4) . Push out Cylindrical Pin (Pos. 3)
2. Lift off the Gear assembly from the Drive Shaft (Pos. 9). The Turbine shaft (Pos. 8) will now be
released and can be removed.
3. Remove Circlip (Pos. 11) and pull out the Pinion (Pos. 1) releasing the Worm wheel (pos. 2) and
Washer (Pos. 14).
4.
Remove the Circlip (Pos. 11) and pull off the Horizontal shaft (Pos. 12).
Reassembly:
Reassembly is carried out in the opposite order.
Before mounting Gear wheel (Pos. 4) make sure that the Horizontal shaft (Pos. 12) and the Worm
wheel (Pos. 2) can be rotated easily without any uneven resistance.
Instruction Manual, Toftejorg SaniMega
Page 11
IM-TE91A590-EN1
ï
Return to menu
