6 Maintenance
MultiJet 65
6.3
Top assembly
Disassembly
1. Remove Locking wire.
2. Remove Screws (pos. 34). Loosen with Key (tool No. TE135) and unscrew with Screwdriver (tool No. TE135A) through
holes in the Flange.
3. Lift off Flange (pos. 1).
4. Remove Screw (pos. 17), Spring washer (pos. 16) and Washer (pos. 18). To secure Impeller against rotation, insert carefully
Screwdriver (tool No. TE135A), through Impeller (pos. 4) into a hole in the Stem.
5. Pull off Impeller (pos. 4).
Reassembly
1. Reinstall Impeller (pos. 4). Make sure that Impeller is correctly rotated to be pushed onto Turbine shaft. Do not try to hammer
Impeller in position, as this will damage Slide bearing under Turbine shaft.
2. Mount Washer (pos. 18), Spring washer (pos. 16) and Screw (pos. 17) and tighten. To secure Impeller against rotation insert
carefully Screwdriver (tool No. TE135A) through Impeller (pos. 4) into a hole in the Stem.
3. Mount Flange (pos. 1). Rotate Flange to align holes in Flange and Stem.
4. Mount Screws (pos. 34) with Screwdriver (tool No. TE135A) through holes in the Flange. Tighten with Key (tool No. TE135).
5. Secure with Locking wire (pos 19).
22
Summary of Contents for Toftejorg MultiJet 65
