Alfa Laval Toftejorg MultiJet 25 Instruction Manual Download Page 29

How to order Spare Parts and Claim Procedure 

How to Order Spare Parts 

On the Cross Sectional Drawing as well as on all instruction drawings, the individual parts have a pos. 
no., which is the same on all drawings in the Operators Manual. From the pos. no. the part is easily 
identified in the Reference List of Parts, page 26. 
 
Individual parts should always be ordered from the Reference List of Parts, page 26. Ref. No. and 
Description should be clearly stated. 
 
Please also quote the type of machine and serial No. This will help us to help you. The type and serial 
Nos. are stamped on the Body of the tank cleaning machine. 
 
 

Claim Procedure 

In case of failure that needs assistance from Alfa Laval Tank Equipment A/S, it is essential for our 
evaluation that the problem as well as the working conditions of the machine are described as detailed 
as possible. 
 
For description of the working conditions, fill in copy of Claim Report - Working Conditions, which you 
will find at the back of this manual. 
 
 

How to contact Alfa Laval Tank Equipment A/S 

For further information please feel free to contact:  
 
Alfa Laval Tank Equipment A/S 
Baldershoej 19 
P.O. Box 1149 
2635 Ishoej 
Denmark 
 
Phone no.:  +45 43 55 86 00 
Fax no.:  

+45 43 55 86 01 

www.alfalaval.com 
www.toftejorg.com 
 
Contact details for all countries are continually updated on our websites. 
 

Page 28 

Instruction Manual, Toftejorg MultiJet 25 

 

IM-TE91A615-EN1 

ï

Return to menu

Summary of Contents for Toftejorg MultiJet 25

































Reviews: