Alfa Laval ThinkTop D30, Instruction Manual

Page: 9 / 16

4 Installation
4.3 Installation instructions
Step Step Step 111
Place the ThinkTop D30 on top of the actuator.
Ensure that the unit is correctly mounted by pressing down on
top of the ThinkTop D30.
Cross-tighten the two allen screws carefully (1.50 Nm).
When mounting the ThinkTop D30 on a horizontal mounted
actuator make sure that the exhaust port is not pointing upwards.
The exhaust port is marked with "EX.".
Step Step Step 222
Connect the air supply to the air-in port (A).
Connect the air-out port (B) to the actuator.
NOTE! NOTE!
NOTE!
Option in case of a ¼” air supply hose system.
Connect the air supply hose via an ø6 / ¼” angle adaptor.
The angle adaptor is sold separately:
Article number: 9611-99-5679, ø6 / ¼” angle adaptor.
The angle adaptor is also available as ø6 / ø6:
Article number: 9611-99-5678, ø6 / ø6 angle adaptor.
Step Step Step 333
Remove the top cover by turning the top cover anti-clockwise.
When the mark on the top cover (C) is aligned with the open
padlock symbol (D), the top cover can be lifted off.
9