Alfa Laval TE67X000002150, Instruction Manual

Page: 17 / 34

Instruction manual Page 15
TE67X000002150 Ethernet Module
Status and weight transfer using EtherNetIP
IM-TE91K013-EN2
6) Hardware description
(continued)
6.7 DIP-switch settings
The TE67X000002150 Ethernet module is equipped with an 8 pole DIP switch block located in the front
of the module named SW1. This DIP switch block has the following function:
SWITCH FUNCTION
SW1.1-2 Scaling Used to select the desired scaling as described above.
SW1.3 Measurement time Used to select the desired measurement time as described above.
SW1.4-SW1.7 Filtering Used to select the desired filter as described above.
SW1.8 Reserved for future use
The TE67X000002150 Ethernet module is also equipped with an 8 pole DIP switch block located
inside the module that is only accessible if the cover is removed. This DIP switch block is named SW2
and has the following function:
SWITCH FUNCTION
Sw2.1-Sw2.8 Reserved for future use
6.8 Light Emitting Diodes (LEDs)
The TE67X000002150 Ethernet module is equipped with a number of status lamps (LEDs) located in
the front panel. These have the following functionality:
LED FUNCTION
TxBB
(Green)
TE67X000002150 communication with load cells
Ethernet module is communicating with load cells.
Ethernet connector
(RJ45)
Yellow
Link
Ethernet is connected.
Ethernet connector
(RJ45)
Green
Activity
Ethernet data is received or transmitted.
MS
(Green/Red)
Module Status LED
The TE67X000002150 Module Status LED, that can be lit/flashing in different
colors depending on the status of the module. The function of the MS LED is given
in the table below
NS
(Green/Red)
Network Status LED
The TE67X000002150 Network Status LED, that can be lit/flashing in different
colors depending on the status of the network. The function of the NS LED is given
i th t bl b l
D1
(Red)
Reserved for future use
D2 (Red) Reserved for future use