3 Installation
Step 5
Avoid stresses to the pump.
Pay special attention to:
-
Vibrations.
-
Thermal expansion of the tubes.
-
Excessive welding.
-
Overloading of the pipelines.
3100-0016
!
Risk of damage!
Step 6
Never test the direction of rotation with liquid in the pump.
Pre-use check:
1. Start and stop the motor momentarily.
2. Ensure that the direction of rotation of the motor is clockwise
as viewed from the back of the motor.
3100-0017
3.4
Recycling information
• Unpacking
-
Packing material consists of wood, plastics, cardboard boxes and in some cases metal straps.
-
Wood and cardboard boxes can be reused, recycled or used for energy recovery.
-
Plastics should be recycled or burnt at a licensed waste incineration plant.
-
Metal straps should be sent for material recycling.
• Maintenance
-
During maintenance, oil and wear parts in the machine are replaced.
-
All metal parts should be sent for material recycling.
-
Worn out or defective electronic parts should be sent to a licensed handler for material recycling.
-
Oil and all non-metal wear parts must be taken care of in accordance with local regulations.
• Scrapping
-
At the end of use, the equipment shall be recycled according to the relevant, local regulations. Besides the equipment itself,
any hazardous residues from the process liquid must be considered and dealt with in a proper manner. When in doubt, or in
the absence of local regulations, please contact your local Alfa Laval sales company.
11
Summary of Contents for MR-166S
Page 2: ......
