5 Maintenance
Read the instructions carefully. The items refer to the parts list and service kits section.
Lubricate the rubber seals before fitting them.
: Relates to the shaft seal.
5.6
Adjustment of shaft
Step 1
1. Loosen screws (6)
2. Pull off stub shaft (7) together with compression rings (5a, 5b)
Step 2
1. Push stub shaft (7) together with compression rings (5a, 5b)
onto the motor shaft
2. Check that the clearance between the end of the stub shaft
and the motor flange is 10-20 mm (0.39 - 0.78 inch)
10-20 mm
(0.39-0.78
inch)
Step 3
1. Tighten screws (6) gently and evenly
2. Ensure that the stub shaft (7) can be moved on the motor shaft
Step 4
1. Fit shroud (2)
2. Fit adapter (16), screws (17), washers (19) and nuts (18) and
tighten
32
