3 Installation
All position numbers and item numbers refer to the drawings show and specified in chapter 7 Parts list/Service kits.
Step 4
3.3.5
1. Clean the threads (3 and 5) and lift the complete drive unit using a hoist (do not use the lifting eye on the gear motor) and
screw on the shaft (5), (incl. the complete drive unit) applying Loctite to the threads and tighten to 100-300 Nm.
2. The complete unit is lifted a little higher enabling the fastener tool (50) to be removed.
3. The complete unit is positioned on top of the welding flange (60) (ensure that the O-ring (35) is installed correctly).
4. The washers (17) and nuts (16) are positioned and sequentially tightened to about 200 Nm.
4304-0012
13
