16/20
ALFA IN a.s.
©
www.alfain.eu
REMOTE CONTROL
PEGAS 350 AC/DC PULSE can work in both of TIG modes with two types of
remote control.
1. TIG torch with UP-DOWN buttons for selecting size of welding current.
2. Foot pedal.
Remote controls are connected with connector
A6
.
Fig. 7 - Foot pedal remote control
Pos.
Description
P1
Stepping surface
P2
Potentiometer of setting the limit of maximal welding current
P3
Connector (connect to matching connector
A6
)
1.
When you connect the connector
P3
to matching connector
A6
on the front
panel, the function setting the current from the front panel will blocked,
instead of that the max. current is limited by the potentiometer
P2
.
2.
With potentiometer
P2
on the foot pedal is possible limit the maximal
current.
3.
By pressing the stepping surface
P1
down, you start the welding process.
The value of the welding current depends on the level of pressing the
stepping surface. To reach the maximal current limited by potentiometer
P2
requires to gently pressing to the lowest position of the stepping surface
P1
. The set current will be displayed on the current display
T21
see fig. n.
2.
4.
The welding process ends after releasing the stepping surface
P1
.