04
01
02
03
01 - LID
02 - CUP.
03 - MOTOR HOUSING
PICTURE - 02
05
IMPORTANT
Do not use this equipment to process thick textures .
IMPORTANT
The blending time depends on each product.
IMPORTANT
NEVER SWITCH THE MACHINE ON WITHOUT LOAD INSIDE BECAUSE IT WILL
CAUSE IRREPARABLE DAMAGES.
3.3 Cleaning
IMPORTANT
Never do cleaning with the machine plugged in. Always unplug the machine
before cleaning. Before removing the Cup be sure the motor has completely
stopped.
Follow the below instructions to wash the removable parts:
3.3.1 Unplug the machine.
3.3.2 Remove the Lid Nº01 (Pic.02) first then the Cup Nº02 (Pic.02).
3.3.3 Wash all removable parts with running water and neutral soap.
3.3.4 To reinstall them, follow the above order inversely.
3.3.5 To clean the Motor Housing Nº03 (Pic.02) use a wet cloth with alcohol.
IMPORTANT
When washing inside the Cup be careful with the knife as it has sharp edges.
4. General Safety Practices
The following safety instructions are addressed to both the operator of the
machine as well as the person in charge of maintenance. The machine has to be
delivered to the operator in perfect conditions of use by the Distributor to the user. The
user shall operate the machine only after being well acquainted with the safety
procedures described in the present manual. READ THIS MANUAL WITH ATTENTION.
4.1 Basic Operation Practices
4.1.1 Dangerous parts
Some parts of the electric devices are connected to high voltage points. These
parts when touched may cause severe electrical shocks or even be FATAL.
Never touch commands such as buttons, switches and knobs with wet hands,
wet clothes and/or shoes. By not following these instructions operator could be exposed
to severe electrical shocks or even to a FATAL situation.
4.1.2 Warnings
The operator has to be well familiar with the position of ON/OFF Switch to make
sure the Switch is easy to be reached when necessary. Before any kind of maintenance,
physically remove plug from the socket.
Provide space for a comfortable operation thus avoiding accidents.
Water or oil spilled on the floor will turn it slippery and dangerous. Make sure
the floor is clean and dry.
Before giving any manual command (switch, buttons, turn keys or lever) be sure
the command is the correct one. Check this manual for further details if necessary.
Never use a manual command (switch, buttons, lever) unadvisedly.
If any work is to be made by two or more persons, coordination signs will have to be
given for each operation step. Every step of the operation shall be taken only if the sign
has been made and responded.
4.1.3 Advices
In case of power shortage, immediately turn the machine OFF.
Use recommended or equivalent lubricants, oils or greases.
Avoid mechanical shocks as they may cause failures or malfunction.
Avoid penetration of water, dirt or dust into mechanical or electrical components
of the machine.
DO NOT MODIFY original characteristics of the machine.
DO NOT REMOVE, TEAR OFF or MACULATE ANY SAFETY or IDENTIFICATION
LABELS stuck on the machine. If any label has been removed or is no longer legible,
contact your nearest dealer for replacement.
