5
1
-
1 General recommendations
The gas heater
ATLX
range are intended for the heating of industrial premises and poultry houses, for
indoor use only.
The unit can only be installed in rooms which are sufficiently ventilated, except if it has a sealed
connection.
The proper functioning of the gas heater depends on correct installation and commissioning.
Installation and maintenance must be carried out by qualified personnel in conformity with the regulatory
texts and the rules in force.
The non
-
compliance with such rules entails the rejection of all responsibility from the manufacturer.
DO NOT INSTALL GAS HEATERS IN :
-
Rooms which have a risk of explosion,
-
Rooms containing chlorinated combination steam,
-
Rooms with a high content of combustible dust,
-
Rooms which are excessively humid (electrical danger).
-
Domestic premises
After having checked that the installation respects the recommendations of this notice, it is the
responsibility of the installer:
1) to inform the user:
-
that it cannot carry out itself any modifications to the design of the devices or the method of carrying out
the installation; the least modification (exchange, withdrawal....) of safety components or parts which
influence the efficiency of the device or the hygiene of combustion will systematically cause the withdrawal
of the EC marking.
-
that it is necessary to recommend cleaning and maintenance operations.
An annual preventive maintenance operation is compulsory.
2) to give these instructions to the user. They form an integral part of the device and must be retained and
must accompany the device, even in the case of sale to another owner or user.
Being always intent on improving the quality of our products, we seek to improve them on a permanent
basis. We therefore reserve the right, at any moment, to modify the specifications shown in this document.
1
-
2 Description of equipment
The gas heater
ATLX
is an independent hot air generator, running on natural gas and on propane
(Standard EN1050:2009, certificate No.1312BO3933) ;
•
It is in conformity with the European directives 2009/142/CE applicable to gas devices
•
It is in conformity with the regulation (UE) 2016/426 applicable to gas devices
It constitutes a "direct" heating gas system ; it is a device for the production and the emission of heat
without an intermediate vehicular fluid. For the whole range described in these instructions, the
combustion products are evacuated out of the room by an extractor. The combustible air is taken from the
ambient environment or from outside. Those units can be connected with concentric flue kit, C12
-
C32 type
or with single flue kit, B22 type.
The gas heaters of the
ATLX
range work with different gas indicated on the identification plate in
conformity with the European directive.