13
Pantone 415
upper body on the power supply
base.
• Always pull the plug from the
socket when the espresso maker
is not being used and before you
clean it.
• Remove the espresso maker from
the power supply base and let it
cool off before cleaning it.
• Do not move the espresso maker
while it is in operation.
• In case of malfunction of or
damage to the espresso maker
or power cable, do not use the
espresso maker. Take it to your
dealer.
• NEVER OPEN THE UNIT. ALL
ELECTRICAL REPAIRS MUST
BE DONE BY QUALIFIED
PERSONNEL.
• Use the espresso maker ONLY with
its power supply base.
• Replace any worn parts with
original replacement parts.
• Use the espresso maker ONLY for
making coffee. Use only ground
coffee and no other type of extract.
• Do not put any object in the
espresso maker while it is in
operation.
• Every espresso maker is tested
during the production cycle.
Therefore, any traces of humidity
in the boiler are normal and do
not compromise operation of the
espresso maker.
• At the end of its life cycle, the
espresso maker must be disposed
of separately from other household
waste. Deliver it to a differentiated
collection centre for electrical and
electronic waste, or take it to your
Alessi dealer, or to any retailer of
electrical and electronic devices
when buying a new unit of the
same type.
• THIS ESPRESSO MAKER IS
INTENDED FOR HOME USE
ONLY.
• This espresso maker is not to
be used by anyone (including
children) with reduced physical,
sensory, or mental abilities or with
lack of experience and knowledge,
unless such persons have been
taught how to use the espresso
maker or are supervised by a
person responsible for their safety.
• DO NOT LET CHILDREN PLAY
WITH THE ESPRESSO MAKER:
IT IS NOT A TOY.
Description of the epresso maker
This electric espresso maker is com
-
posed of (
fig. 1):
A
Thermoplastic resin cover
B
18/10 stainless steel upper
container with internal column
C
Thermoplastic resin handle
D
Upper filter plate
E
Silicon rubber gasket
F
Reduction filter for three cups
G
Funnel filter
H Boiler
I
Brass safety valve
L
Thermoplastic resin base with red
pilot lamp
M
Power supply base with cable
winder and display
N
Windable cable
O
Back-lighted display
P
PROGRAM button
Q
ON/OFF button
R
“+” bu
tton
S “–
” button
T
Red pilot lamp – indicates that
the espresso maker is connected
to the electrical outlet
U
Green pilot lamp - indicates that
the espresso maker is preparing
coffee
BEFORE USING THE ESPRESSO
MAKER FOR THE FIRST TIME
• Remove all packing parts from
the espresso maker and from the
power supply base.
• Wash the upper container with
normal dish soap (for daily
cleaning, see:
How to care for
your electric espresso maker).
• Make and discard several batches
of coffee, using the grounds to
eliminate any metallic taste (see:
How to use your electric espresso
maker).
• Before using the espresso maker
for the first time, charge the
battery in the power supply base
as follows:
