Alesis PowerTrip-8 Quick Start Owner'S Manual Download Page 3

 

- 3 - 

 

Front Panel Features 

 

 

 

1. 

Rack Lights Switch

 

– turns the pull-out rack lights ON or OFF

.

 

2. 

Rack Lights Dimmer Knob – 

varies the brightness of the pull-out rack 

lights.  

3. 

Pull-out Rack Lights 

– can be pulled out and aimed to illuminate the rest of 

the gear in your rack. 

4. 

AC Voltage Display 

– displays current line voltage being delivered to the 

eight AC power jacks on the rear of the unit. 

5. 

Surge Protection Switch

 – switch will pop out if there is a power surge 

large enough to activate it.   Turn the REAR POWER switch off, then press 
the RESET switch back in.  Turn the REAR POWER switch back on to 
resume operation. 

6. 

Rear Power Switch 

– turns the eight rear-panel AC power jacks ON and 

OFF. 

 

 

Rear Panel Features 

 

 

 
 

1. 

AC Input Cable

 – delivers power to your POWERTRIP-8. 

2. 

AC Power Jacks

 – These provide power for up to eight 110V devices. The 

four right-most jacks are spaced so as to allow for “wall-wart” power 
supplies. All eight jacks are circuit breaker-protected, high-voltage and 
transient-suppressed, and filtered to prevent RFI/EMI interference.

 

 

Summary of Contents for PowerTrip-8













Reviews: