10
Rhythm Programming
You can use the rhythm programming feature to create your own custom drum rhythm to
accompany you while you play the keys.
To create a custom accompaniment rhythm:
1.
Press the
Program button
to enter Programming Mode.
Prg
will appear on the
Display
, and the
keys will automatically shift to percussion sounds.
2.
Program the rhythm by playing each drum sound in the order that you want to hear them repeat
in the rhythmic pattern. You can play the drum sounds with the keys or with the
Drum Kit
buttons
. If using the keys, see the image above each key in order to know what drum sound a
key will play. The programmed rhythm can contain up to 32 drum sounds. Each drum sound in
the pattern will be the length of a quarter note.
Note:
You cannot program two percussion sounds to play at the same time.
3.
Press
Play
to stop programming and hear the rhythm play on a loop.
Ply
will appear on the
Display
.
4.
After pressing
Play
, the keys will automatically switch back to the last selected tone, and you
can play along to your custom rhythm.
To change the tempo of the custom rhythm
, press the
Tempo + button
or
Tempo - button
.
Press the
Tempo +
and
Tempo - buttons
simultaneously to reset to the default tempo (
120 BPM
).
To adjust the volume of the custom rhythm,
press the
Rhythm Vol +
or
Rhythm Vol – button
.
Press the
Rhythm Vol +
and
Rhythm Vol – buttons
simultaneously to reset to the default volume
level (indicated on the
Display
as
A07
).
To stop the custom rhythm from playing,
press the
Play button
again. The keyboard will re-enter
Programming Mode, and you can program a new rhythm or press the
Play button
to start the
previously programmed rhythm. Alternatively, you can stop a custom rhythm from playing by
pressing the
Program button,
which will make the keyboard exit Programming Mode and erase the
rhythm that was playing. When you exit Programming Mode,
OFF
will temporarily appear on the
Display
.
Note:
If you turn off the keyboard while using a custom rhythm, the custom rhythm will be erased.
Tip:
With Programming Mode activated, press the
Single chord button
while a custom rhythm is
playing or stopped. This will allow you to use the abbreviated chord shapes (pictured in the previous
section) on the keys below
G2
to play full chords. The chords will not automatically play along with
the custom rhythm; they will stop ringing out after you release the keys. However, you will still have
the ability to play full chords at the quick touch of 1-3 adjacent keys.
Summary of Contents for Melody 54
