manualshive.com logo in svg

Alesis MASTERLINK ML-9600, Reference Manual

Share
Download
Alesis MASTERLINK ML-9600 Reference Manual Download Page 8

Saftey Notice 

VIII

 

 

A

LESIS 

ML-9600 R

EFERENCE 

M

ANUAL

  

Beim Benutzen dieses Produktes beachten Sie 
bitte die folgenden Sicherheitshinweise:  

1.  Lesen Sie die Hinweise. 
2.  Halten Sie sich an die Anleitung. 
3.  Beachten Sie alle Warnungen. 
4.  Beachten Sie alle Hinweise. 
5.  Bringen Sie das Gerät nie mit Wasser in Berührung. 
6.  Verwenden Sie zur Reinigung nur ein weiches Tuch.  Sprühen Sie keine flüssiger Reiniger auf die 

Oberfläche, dies könnte zur Beschädigung der Vorderseite führen und auch weitere Schäden 
verursachen. 

7.  Halten Sie sich beim Aufbau des Gerätes an die Angaben des Herstellers. 
8.  Stellen Sie das Gerät nich in der Nähe von Heizkörpern, Heizungsklappen oder anderen 

Wärmequellen (einschließlich Verstärkern) auf. 

9.  Verlegen Sie das Netzkabel des Gerätes niemals so, daß man darüber stolpern kann oder daß es 

gequetscht wird. 

10.  Benutzen Sie nur das vom Hersteller empfohlene Zubehör. 
11.  Verwenden Sie ausschließlich Wagen, Ständer, Racks oder Tische, die speziell für professionelle 

Audio- und Musikinstrumente geeignet sind.  Achten Sie immer darauf, daß die jeweiligen Geräte 
sicher installiert sind, um Schäden und Verletzungen zu vermeiden. Wenn Sie einen Rollwagen 
benutzen, achten Sie darauf, das dieser nicht umkippt, um Verletzungen auszuschließen. 

12.  Ziehen Sie während eines Gewitters oder wenn Sie das Gerät über einen längeren Zeitraum nicht 

benutzen den Netzstecher aus der Steckdose. 

13.  Die Wartung sollte nur durch qualifiziertes Fachpersonal erfolgen.  Die Wartung wird notwendig, 

wenn das Gerät beschädigt wurde oder aber das Stromkabel oder der Stecker, Gegenstände oder 
Flüssigkeit in das Gerät gelangt sind, das Gerät dem Regen oder Feuchtigkeit ausgesetzt war und 
deshalb nicht mehr normal arbeitet oder heruntergefallen ist. 

14.  Bei normalem Betrieb des Gerätes kommt es zu Wärmeentwicklungen.  Wenn Sie das Gerät in 

einem Rack eingebaut haben, sollte während des Betriebes die Zufuhr von Kühlluft stets 
gewährleitstet sein.  Arbeiten Sie nie bei geschlossenem Rack.  Bei mehreren Rackgeräten sollten 

diese mit einem geringen abstand voneinander eingebaut werden.  Stapeln Sie dieses Gerät nicht 
zwischen Geräten mit hoher Wärmeentwicklung. 

15.  Dieses Produkt kann in Verbindung mit einem Verstärker und Kopfhörern oder Lautsprechern 

Lautstärkepegel erzeugen, die anhaltende Gehörschäden verursachen.  Betreiben Sie es nicht über 
längere Zeit mit hoher Lautstärke oder einem Pegel, der Ihnen unangenehm is.  Wenn Sie ein 
Nachlassen des Gehörs oder ein Klingeln in den Ohren feststellen, sollten Sie einen Ohrenarzt 
aufsuchen. 

 

Summary of Contents for MASTERLINK ML-9600




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands