manualshive.com logo in svg

Alesis MASTERLINK ML-9600, Reference Manual

Share
Download
Alesis MASTERLINK ML-9600 Reference Manual Download Page 58

Chapter 8 

48 

 

A

LESIS 

ML-9600 R

EFERENCE 

M

ANUAL

  

8.9  U

TIL

9: S

YSTEM 

I

NFORMATION

 

The system information page displays the following information: 
 

• 

Software Version – This is your main system software version. 

• 

File System Version – This is the current version of the file system that manages data on the hard 

disk drive.    

• 

Eprom Version – This is the version of firmware that boots the system. 

• 

CD Drive Information – This is the CD Drive model and internal firmware version. 

• 

Hard Drive Information – This is the Hard Drive model and internal firmware version. 

 
Most of this information is only of interest to Alesis technical support staff; however you may wish to 
copy the information onto a piece of paper and store it in a safe place in case you experience a problem 
with your unit and need to contact Alesis. 
 

 
 

Summary of Contents for MASTERLINK ML-9600




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands