SIP Annunciator
Installation/Guide
This guide provides typical installation instructions. Please bear in mind that building codes vary and the technician
installing the SIP Annunciator unit(s) is responsible for compliance with any relevant codes.
Specifications
●
Power: POE for SIP Annunciator and 24VAC/AC
for the TTS module
●
Dimensions: 3" H x 10" W x 6.15" D
●
Weight: 3.5 lbs.
●
Data Input: RS232 from Alert Beacon
●
Temperature range: -40C to 85C
Installation Kit
●
SIP Annunciator
●
12VDC plug-in power transformer
Due to differences in installation styles and locations, it is
the responsibility of the customer to supply the power
cable connecting to the 12VDC plug-in power
transformer. 18AWG, 2-conductor cable is suggested;
please ensure compliance with applicable building codes.
General Mounting Guidelines
Recommended locations for installing SIP Annunciators include:
1) IT Closets
Alertus recommends a location close to source of power, Alert Beacon, and phone system interface.
Mounting
Identify a suitable mounting location close to source of power, Alert Beacon, and phone system interface. The
recommended mounting method for the SIP Annunciator is to use screws through the four (4) holes, near either end
of the box. Standard drywall-type screws (or other types, as appropriate for the mounting surface) can be driven
directly through these holes. This adds resistance to accidental or malicious removal. Cables can be run inside the
three included wire glands.
