AlertLabs SENTREE, Installation Manual, Page: 5 / 20

WARNING
RISK OF ELECTRIC SHOCK CAN CAUSE INJURY OR DEATH: DISCONNECT ALL REMOTE ELECTRIC
POWER SUPPLIES BEFORE SERVICING
CAUTION
Installation must be performed by qualified HVAC technicians that are certified by the local Air
Conditioner and Refrigeration Licensing Agency. Good refrigeration practices are expected to
be used.
This Sentree device is intended to be connected to condenser units powered by 240 VAC,
single phase, 60 Hz power and must use the 1/4 inch tabs on the line side of the condenser’s
contactor.
This Sentree device is intended for use on systems up to 600 psi operating pressure.
This Sentree device is only intended for use on 1–5 ton residential air conditioner units.
There shall be no cutting of wires, rearrangement of existing components in the installed unit,
cutting, drilling or welding in electrical components and in other areas where such operations
may damage electrical or refrigerant components and wiring.
PKG-000027-001