Installation & Notice
Ope n the case and remov e the batter y activation strip.
Mou nt the sensor on the door frame and the mag net on the door.
Mak e sure the mag net is on the right side of the transmitter
Place the transmitter in the desired location, mou nt the
mag net no more than 1cm away from the transmitter and secure
the transmitter and mag net with double-sided tapes or screws.
Avoid mou nting sensors in areas with a large quantity of met al
or electrical wiring, such as a furnace or utility room.
Specifications
Powe r supply
Static current
Alarm current
Transmitting distance
Radio frequency
Housing mat erial
Ope rating tempe rature
Relative humidity
Transmitter dimen sions (LxWxH)
Mag net dimen sions (LxWxH)
DC 1.5V (AA 1.5V LR6 Batter y x 1pc)
≤ 30uA
≤ 40mA
≤80m (in open area)
315MHz /433MHz (±75KHz)
ABS plastic
-10°C~55°C
≤80% (non-condensing)
71 x 34
x 17.5mm
51 x 12 x 13.5mm
40
39
