Arm & Disarm by Free Phone Call
Connect Wireless Accessories & RFID Tags
Arm
Disarm
Call the control panel number, hang up when hearing
the ring tone. The panel will call back. The user hangs
up the phone directly to arm the system.
Call the control panel number, hold on until the panel
hangs up the call.The panel will not call back. System
is disarmed.
Input 4-6 digits password, press Connect Button
,
the LED indicator lights up, then trigger the accessory
or RFID tag once within 15 seconds, the connection is
successful after a beep.
Once two beeps are heard, the accessory has been
connected before. The first connected accessory is in
Zone 1, the second one in Zone 2, and so on.
30
29
Connect Wireless Siren
The newly-added wireless siren can be used after
connecting to the control panel.
Press the Connect Button of the wireless siren for 0.5 second,
the Connect Button LED indicator lights on, and then press
the Arm Button on the control panel, the siren will be
connected after one beep is heard.
Testing: Press the Arm Button on the remote control, to make
sure that the internal siren and wireless siren both beep once,
the connection is successful. If not, the connection fails,
please reconnect them.
Once the intruder is detected, both internal siren and wireless
siren will hoot to deter the illegal intruder. (The siren will be
off in 5 minutes as the default setting). At the same time, the
alarm system will send SMS and auto dial to users.
Operation:
