background image

General notices and Warnings

7

• The G100 cannot work properly in a tunnel or a basement, because the satellite 
reception is disturbed. We strongly recommend driving carefully in those areas. The G100 
needs a short time to establish the connection to the satellites again.

• The G100 calculates the direction of the vehicle to avoid wrong alerts. Anyway, wrong 
alerts can occur sometimes. If you’re driving a parallel road that is sited very close to a 
road on which an alert is located, a wrong alert may occur. 

• The G100 is a driving help that must be considered as a prevention tool. The purpose of 
this system is to incite you to drive carefully and to respect the road safety rules. We 
decline all responsibility for any infraction to the legislation and the road safety rules.

• Hardware and software of this device are the property of GPS PREVENT and are 
protected by copyright laws and intellectual property laws. They may not be copied or 
distributed in any illegal manner.

• The GPS (Global Positioning System) is placed under the authority of the American 
government. GPS Prevent cannot be held responsible for the availability and precision of 
the GPS.

• You must respect all road safety rules. 

• Do not disturb the driver or cause any damage to the safety elements of the vehicle 
while installing the GPS.

• While installing the device, make sure that it cannot be dangerous to the occupants of 
the vehicle, particularly in case of projection.  

• Recycling legislation for household electrical appliances:

• Keep the unit and the cigar-plug away from water. 

Waste Electrical and Electronic Equipment Directive 

According to Directive 2002/96/EC on Waste Electrical and 
Electronic Equipment, household electrical appliances 
cannot be dispersed in the conventional waste stream. Used 
electrical and electronic equipments must be collected.

• If the unit or the cigar-plug falls in the water, don’t touch the unit before you have 
disconnected the cigar-plug from the cigar socket of your vehicle, and remove the unit 
using the cable.

• Read this manual and all safety warnings carefully before you use or install this unit.

• If your vehicle is parked in the sun, let the unit cool down before you use it.

• Clean-up instructions: don’t use solvents. Clean regularly.

• Don’t let liquids or objects enter the housing through the ventilation holes. They may 
damage the internal parts of the unit and cause an electric shock, a short-cut or a fire.

• Do not try to repair and disassemble the unit by yourself. This may cause an electric 
shock. Please contact a qualified technician. 

• Disconnect the unit when it’s not in use. To protect this unit in case of a storm or when 
it’s not used during a long time, disconnect it from the network.

• 12/24 V negative earth socket only. Remove cigar-plug while leaving vehicle. Disconnect 
cigar-plug when starting vehicle. Always use the correct rated fuse. 

• Keep away from naked flames (like candles).

• Use in temperate areas.

• A minimum space of 2 inches should be maintained around the unit for its ventilation.

• Don’t connect any cable to the unit before removing or connecting the power cable. 
Connect the external antenna after the power cable, and disconnect it before you remove 
the power cable.

• The software and the drivers are provided as is. GPSprevent declines all responsibility in 
case of software or hardware incompatibility.

• The access to the website is not guaranteed in case of site maintenance, network 
disturbance, connection problems or any problem that could disturb access to the 
website. 

• To minimize the risks of interactions between two GPS devices, a distance of 20 inches 
should be maintained between this unit and another GPS device.

Summary of Contents for GPS PREVENT G100








Reviews: