MinkPolice User Manual
EN - 3
-
Insert your SIM card into the SIM card holder, underneath the
battery holder.
-
Insert 4 AA batteries into
the battery holder. We
recommend using Energizer
L91 Ultimate Lithium
batteries.
-
Screw the lit tightly onto the
box by tightening each
screw a little at a time.
9.3
Activation
2.3.1 Magnet sensor
-
Activate the magnetic switch inside the box: Place the magnet
holder on the red line on the box. The module will then give off a
beep.
-
The module will now automatically connect to the MinkPolice
server, and after about 30 seconds it will give off two long beeps.
The module is now registered, and it will appear in your Trap
Overview on minkpolice.com. If you register several modules,
they will all appear in the Trap Overview with their individual
status. Read more about the user online interface below.
2.3.2 Tilt sensor
- In order to use the device as a
tilt sensor, change the type of
device in your settings
Æ
Trap
Æ
Trap type
Æ
Tilt Sensor,
then choose your preferred
angle.
-
Activate the module by placing
the magnet on the red marker
on the box and wait for two
beeps. After this first
