Aleratec 1:7 DVD/CD Tower Publisher SL, Quick Start Manual

Page: 15 / 24

www.aleratec.com 13
Making Disc-to-Disc Copies
This process copies a Master Disc to several blank discs simultaneously. Due to
the nature of simultaneous disc duplication, a good quality Master Disc and lower
recording speeds maybe necessary to ensure high success and quality duplications
rates.
1. Turn on the duplicator. After the duplicator has booted up, you will see the
following display:
2. Make sure the Source Drive is set to the DVD-ROM drive.
It is very important to make sure that your current Source Drive is the DVD-ROM
in order to avoid unnecessary error messages. To check the Source Drive, do the
following:
a. Use
UP
or
DOWN
arrow buttons to navigate to the following screen:
b. Press ENT to enter Select Source menu and you shall see the following:
Make sure it is located at “Drive 2 Port 2.1”. If not, press the UP or
DOWN navigation button to search for it.
c. Press ENT to submit your selection.
3. Go back to the “COPY” menu.
a. Use UP or DOWN arrow button to navigate to the following screen:
DUPLICATOR 1.00
1. COPY
COPY TEST PRINT SOURCE
ESC ENT


DUPLICATOR 1.00
9. Select Source
COPY TEST PRINT SOURCE
ESC ENT


Drive 2 Port 2.1
DVD-ROM
COPY TEST PRINT SOURCE
ESC ENT


DUPLICATOR 1.00
1. COPY
COPY TEST PRINT SOURCE
ESC ENT

