Aleph Objects KT-PR0041NA, User Manual

Page: 20 / 26

2.2.
QUICK PRINT SETTINGS
2.2 Quick Print Settings
Figure 2.1: Quick Print Settings
After setting up Cura for the first time, you will be shown the main interface
screen. (Fig. 2.1, page 19)
Selecting a Quick Print Profile
The print quality settings can be found in the top left-hand corner of the
window. For most filaments, there will be Standard , High Speed , and
High Detail
options. Some of the more exotic filaments may only have a
single profile.
High Detail
Designed to give greater detail and finer objects. This will have a
smaller layer height, which will make each layer thinner, so that curves
seem more natural and walls seem less noticeable. This setting will
also require more layers to be laid down, increasing overall print time.
Standard
Designed to give a balanced resolution by increasing the layer height
19