background image

 

WARNING16: 

Risk of accidental drowning. Extreme caution must be exercised to prevent unauthorized access by 

children. To avoid accidents, ensure that children cannot use this spa unless they 
are supervised at all times. 

WARNING17: 

During pregnancy, soaking in hot water may cause damage to the unborn fetus. 

Limit use to 10 minutes at a time. 

WARNING18: 

The use of alcohol, drugs, or medication before or during the spa use may lead to 

unconsciousness with the possibility of drowning. 

WARNING19: 

Obese persons and persons with a history of heart disease, low or high blood pressure, circulatory 

system problems, or diabetes should consult a physician before use a spa … 

WARNING20: 

Persons using medication should consult a physician before using a spa since some medication may 

induce drowsiness while other medication may affect heart rate, blood pressure, and circulation. 
The water in a spa should never exceed 40°C (104°F). Water temperature between 38°C 
(100°F) and 40°C (104°F). Are considered safe for a healthy adult. Lower water temperatures 
are recommended for young children and when spa use exceeds 10 minutes. Since high 
water temperature has a high potential for causing fatal damage during the early months of pregnancy, 
pregnant or possibly pregnant women should limit spa water temperature to38°C (100°F). 

WARNING21: 

To reduce the risk of injury, never use water higher than 40°C (104°F) into the spa directly. 

WARNING22: 

The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia. 

Hyperthermia occurs when the internal temperature of the body reaches a level several degrees 
above the normal body temperature of 37°C (98.6°F). The symptoms of 
hyperthermia include an increase in the internal temperature of the body, dizziness, lethargy, drowsiness, 
and fainting, The effects of hyperthermia include failure to perceive heat; failure 
to recognize the need to exit the spa; unawareness of impending hazard; fatal damage in pregnant 
women; physical inability to exit the spa; and unconsciousness resulting in the danger of drowning. 

WARNING23: 

Prolonged immersion in a spa may be injurious to your health. 

 
 
CAUTION 1: 

To avoid damage to the pump, the spa must never be operated unless the spa is filled with water. 

CAUTION 2: 

Immediately leave spa if uncomfortable or sleepy. 

Summary of Contents for Inflatable SPA




















Reviews: