Alees Rush 750, Owner'S Manual

Page: 11 / 42

08
Copyright 2014 AleeS Inc. All rights reserved.
Blue
Use thread lock compound on all
screws noted by Color:
Blue = Medium - Red = Strong
Red
Boom Mount
Assembly
Bag 4
Counter Shaft Bearing Bottom Mount
(Part # 200-0059-B) ...QTY 1
Boom Mount Front
(Part # 200-0058) ...QTY 1
......x2
......x2
......x4
Counter Shaft Bearing Top Mount
(Part # 200-0059-T) ...QTY 1
Cap Screw M3 x 6mm
(Part # CS3X6) ...QTY 4
Bearing Spacer
(Part # 300-0022) ....QTY 1
Set Screw Extended M3 x 20mm
(Part # 202-0030) ...QTY 2
Bevel Gear Short 24T CNC
(Part # 302-0001-A & B) ...QTY 1
Not Compatable with injection gear
Counter Gear Shaft
(Part # 202-0020) ...QTY 1
Pin, 2mm OD
(Part # 202-0029) ...QTY 2
Counter Gear 23T CNC
(Part # 202-0019) ...QTY 1
Smaller OD end down
Larger OD end up
Center pins within gears and lock into
position with extended set screws
Ball Bearing 5 x 13 x 4mm
(Part #
B695ZZ) ...QTY 2 (Factory Installed)
Bevel Gear Long 24T CNC
(Part # 302-0002) ...QTY 1
Not Compatable with injection gear
Do not over tighten!
Do not over tighten!
Cap Screw M3 x 6mm
Ball Bearing 12 x 18 x 4mm
Ball Bearing 5 x 13 x 4mm
Note: Top Mount has 2
M3 Threaded holes
!
Use CA or Epoxy
to secure parts
A & B as 1 piece