Alees Rush 750, Owner'S Manual

Page: 6 / 42

03
Copyright 2014 AleeS Inc. All rights reserved.
Blue
Use thread lock compound on all
screws noted by Color:
Blue = Medium - Red = Strong
Red
....x2
....x2
Linkage Ball Long M3
Nut, Locking M8
Flybarless Head
Bag 2
Main Blade Grip
(Part # 100-0001) ...QTY 2
Spindle Shaft
(Part # 100-0005) ... QTY 1
Damper Spacer
(Part # 100-0016) ... QTY 2
Thrust Washer
(Part # 100-0032) ...QTY 2
Thrust Bearing
10 x 18 x 5.5mm
(Part # BF10-18M) ... QTY 2
Flat Washer M8 x 16 x 3mm
(Part # W8x16x3) ... QTY 2
Nut, Locking M8
(Part # LNM8F) ... QTY 2
Grip Arm FBL
(Part # 100-0004) ...QTY 2
Linkage Ball Long M3
(Part # 100-0010) ... QTY 2
Ball Bearing 10 x 19 x 5mm
(Part # B6800ZZ) ... QTY 2
....x4
Cap Screw M3 x 8mm
Cap Screw M3 x 8mm
(Part # CS3X8) ... QTY 4
Blue
Blue
Grooves are
inside
......x2
......x6
....x2
Flat Washer M8 x 16mm x
3mm
Ball Link
(Part # 100-0009) ... QTY 4
Head Turn Buckle M2.5 x 40.5mm
(Part # 102-0001) ... QTY 2
Tapered edge towards
damper
See Thrust
Bearing
Installation
Notes
Use light Oil on spindle
shaft for easy installation
through "stock" dampers
!
!
Thrust Bearing Installation
M8 nut, tighten
approx. 1/8 turn
after nut stops*
(*makes contact to
spindle shoulder)
!
Small notch notes left hand thread end
Ball Bearing 10x19x5mm
Thrust bearing 10x18x5.5mm
Open side of Cage
Larger hole Smaller hole
Spindle Shaft
Apply Bearing Grease!
Thrust Bearing 10x18x5.5mm (F10-18M)
Head Linkage Rod M2.5 x 40.5 Measurement
59.5mm
25.5mm