26
Alarm setting:
With the alarm function, you can
select a time at which the indoor unit
will give an audible alarm.
1. Press and hold the “
ALARM
” key
for 2 seconds. The alarm display
will start to blink.
2. Press the
”UP”
or
“DOWN”
keys
to enter the wanted hour for the
alarm to start.
3. Press the “
ALARM
” key to
continue to the minute setting.
4. Press the
”UP”
or
“DOWN”
keys
to enter the wanted minute for
the alarm to start.
5. Press the “
ALARM
” key to
exit the setting mode or wait 8
seconds.
6. Press the “
ALARM
” key shortly to
activate or deactivate the alarm
(the will indicate if the alarm is
active).
The alarm sound will change the tone
as time passes after the alarm time
has been reached:
• from 0-10 seconds: 1 beep/sec.
• from 10-20 seconds: 2 beeps/sec.
• from 20-30 seconds: 3 beeps/sec.
• from 30-120 seconds: 4 beeps/sec.
Temperature format setting:
The temperature can be displayed
in ºC or ºF. Use the
“DOWN”
key to
switch between the two.
Temperature alert setting:
It’s possible to set an alert tone
in case the outdoor temperature
reaches a certain level. At the
moment the outdoor temperature
reaches below or above this level (as
set) an alarm tone will be heard.
The “
ALERT
” key
(image
F
)
.
1. Press and hold the “
ALERT
” key
for 2 seconds. The Alert Max icon
will start blinking in the display.
2. Press the
”UP”
or
“DOWN”
keys
to enter your chosen maximum
temperature.
3. Press the “
ALERT
” key to
continue to the minimum
temperature setting.
4. Press the
”UP”
or
“DOWN”
keys
to enter your chosen minimum
temperature.
5. Press the “
ALERT
” key to exit the
setting mode or wait 8 seconds.
6. Press the “
ALERT
” key shortly to
activate or deactivate the alarm
(the will indicate if the alarm is
active).
Rechargable batteries:
As you require, you can either use
normal (alkaline) or rechargable
batteries in both the indoor and
outdoor units.
However, please be aware that the
total voltage of rechargable batteries
are lower and may affect proper
operation when they are nearly
empty.
Rechargable batteries must be
charged with an external charger.
Batteries outdoor unit:
Because regular Alkaline batteries
perform poorly or not at all at
temperatures around or below 0°C,
we don’t recommend using standard
Alkaline batteries for the outdoor unit.
This is why we recommend inserting
Lithium batteries into the outdoor
unit, because these are developed
for functioning within a temperature
range of -20°C to 60°C.
These batteries can be ordered from
the customer service department of
Alecto via telephone number 073
6411 355 (Netherlands) or 03 238
5666 (Belgium) or via internet www.
alecto.nl.
Lithium batteries with a capacity of
2900mAh have a life span of at least
one year.
Placement:
• Do not put the indoor unit in
direct sunlight and keep it
removed from heat-emission
such as lamps or heaters.
• For a good reception of the radio-
signals, do not put the indoor-unit
next to big metallic surfaces or
heavy machinary.
• The outdoor unit may be made
for outdoor use, but it is not
waterproof. Place the unit away
from potential rainfall.
• The distance between the indoor
and outdoor unit may not be
more than 50 meters
• The indoor unit can be wall-
mounted by using the gap at the
backside to put it on a screw-
head sticking some mm out of
the wall.
• If you want to put the indoorunit
on a table or similar flat surface,
pull out the table-stand (see
image
G
).
Summary of Contents for WS-1700
