MONITORING
EQUALIZER
FADER
MASTER
MONO/STEREO
VU METER
LIGHT
The headphone jack (20) is used to monitor (6.3 mm jack). Use an eight ohms stereo headphone. With the cue
switches (4) it is possible to choose any channel (monitoring two or more channels simultaneously possible). Volume
level is adjustable by slide control 18.
This mixer features a 7 channel equalizer (6), which may be used to adjust the tone of the mixed output signal. lf the
equalizer is not needed, depress switch 3 to make a flat output signal.
Control slide (16) to fade from one channel to another. Channel selection is made with rotar y selectors 15 and 17.
For instance; when fading from channel 1 to channel 2, set switch 15 in position "l and switch 17 in position "2".
When this function is not needed, set both rotar y switches in position "Off".
Control slide (19) to adjust the volume of the overall mix.
Selector (22) for mono or stereo output signal.
LED vu meter (5). Displays the output level of the complete mix.
BNC connector 12V AC. for lamp holder.
CAUTION: maximum current 100 mA (1,2 Watt).
Exceeding the maximum currect will result in malfunctioning of the mix er, which also may cause a defective power
transformer.
9
