48
Night light:
1. Press and hold the button
to open the menu, now release this button.
2. Repeatedly press the button until
‘ ’
appears on the display, followed by
ON or OFF.
3. Press the button or to switch the night light on (‘ ON’) or off (‘ OFF’).
4. Shortly press the button to save the setting and to close the menu.
Brightness:
1. Press and hold the button to open the menu, now release this button.
2. The symbol will on the display, followed by the current setting.
3. Press the button or to set the brightness from low intensity (
) to
high intensity (
).
4. Shortly press the button to save the setting and to close the menu.
Don’t forget that a high intensity uses more power. When using the parent unit
with the built-in battery, please select a low intensity to prolong the battery’s life
span.
Temperature indication and warning:
The temperature of the room with the baby unit is shown above in the display of
the parent unit. You can select to show the temperature in degrees Fahrenheit or
in degrees Celsius. Besides that, you can let the unit sound an alarm tone when
the temperature in the baby room becomes too high or too low.
1. Press and hold the button to open the menu, now release this button.
2. Repeatedly press the button until ‘ ’ appears on the display, followed by °C
or °F.
3. Press the button or to switch between °C and °F.
4. Shortly press the button , ‘Lo’ will appear followed by the lower threshold
value for the temperature alarm.
5. Use the button or to set the lower threshold value (or select OFF if you
prefer not to set a lower limit).
6. Shortly press the button , ‘Hi’ will appear followed by the upper threshold
value for the temperature alarm.
7. Use the button or to set the upper threshold value (or select OFF if you
prefer not to set a lower limit).
8. Shortly press the button to save the setting and to close the menu.
As soon as the temperature becomes too low or too high, the unit will now sound
short alarm tones while the temperature display will start flashing on the display.
Don’t forget that the temperature is only an indication and you must take into
account a possible deviation of + or - 2 degrees.