52
Switching d sound off automatically when your baby is sleeping: (VOX)
You can set the baby monitor to only have images and sound when your baby is
crying.
When your baby is sleeping quietly, then the parent unit will also switch to a
sleeping mode. As soon as your baby starts crying, the display and sound will be
switched back on instantly.
1. Press and hold the button to open the menu, now release this button.
2. Repeatedly press the button until ‘VOX’ appears on the display, followed by
the current level.
3. Press the button or to set the activation level:
low sensitivity, your baby must be crying loudly before the baby
monitor switches on
...
...
...
high sensitivity, your baby only has to cry softly for the baby monitor
to switch on
OFF VOX switched off, the baby monitor will continuously show images
and transmit sounds of your baby
4. Shortly press the button to save the setting and to close the menu.
When the display and sound are switched off because of silence, you
can press a random button to switch the parent unit back on. The parent
unit will switch back off again after one minute.
Automatic night vision:
The baby unit is provided with 6 built-in infra-red LEDs; these LEDs will automati-
cally switch on when the baby room becomes darker and they will switch off again
when it becomes light. The LEDs can light objects up to a distance of approxima-
tely 2 meters. When it’s dark, that is when the night vision LEDs are switched on,
the images on the parent unit will be displayed in black and white.
Attention: infra-red light cannot be perceived by the human eye; that means you
cannot tell whether the infra-red LEDs are switched on with the naked eye. De-
pending on the type of the infra-red LED, you might be able to see a red glow.
Multi camera / scan function (only when using multiple cameras)
Attention: when using multiple cameras, the unit will NOT automatically
switch to the camera where sound is being detected.
Refer to chapter 5 for registering additional cameras.
1. Shortly press the button to view the images of the next camera
2. After all camera images have been shown, you’ll get the choice ‘SCAN’. This
means that the images of the next camera will be shown with intervals of
10~12 seconds
3. After pressing the button , the images of camera 1 will be shown again.
– in the upper left corner of the display you can check which camera is being
shown.
– the unit will NOT automatically switch to the camera where sound is being
detected.
– when the unit switches to a camera that is not connected (camera is out
of range or switched off), then a black image will appear on the parent unit
during that period and the out of range tones will sound.
DVM-350-manual-NL-FR-D-GB-v1.0.indd 52
22-3-2016 15:01:55
