Align the antenna of the camera and of the monitor to gain the best transmission
quality.
In case the selected channel is disturbed or is in use by another transmitter, use
the “CHANNEL” switch to select another channel. The camera and the monitor
must both be set to the same channel.
Scan:
In case more camera’s are to be observed, you can select the AUTO mode with
button “CHANNEL”. With 4 seconds interval, all 4 channels are scanned and its
picture will come on the screen.
CARE AND MAINTENANCE
- Only clean the monitor and the camera with a soft and moistures cloth.
Never use chemical cleansers.
- Never locate the monitor close to a magnet (loudspeakers), the image will
warp. Avoid placing in a strong electromagnetic field or close to radio
transmitters, the audio and video quality might be disturbed.
- Do not locate the camera and/or monitor close to sensitive electronic
equipment.
- Do not place the camera and/or monitor in direct sunlight.
- Both the camera and the monitor are for indoor use only. Do not use the set
in a moisture surrounding.
- The use of the set under extreme conditions (temperature, moisture, etc),
might reduce the lifetime of the video observation system.
- Never just throw away empty batteries but hand them over to your
local depot for chemical waste.
14