47
3.2 BABY-UNIT:
The baby-unit is powered by the supplied power adaptor with the small plug.
Only connect the supplied
adaptor. Connecting any other
power adaptor can cause
damage to the baby intercom or even
fire.
For mobile use, you can install 3 batteries (excl.).
1.
Fold out the table stand and slide the battery
cover downwards off the baby unit.
2.
Install 3x ordinary alkaline batteries, 1.5 V,
type AAA according the markings inside the
battery compartment.
You may also install rechargeable batteries,
but because the baby-unit is not provided with
a charger function, you must recharge these
batteries using an external battery charger.
3.
Place the battery cover back onto the baby-unit and lock it using the
locking tab.
When connecting the power adapter, you can leave the batteries in
place. By inserting the adaptor plug, the batteries will be automatically
disconnected.
3.3 TABLE STAND / SUSPENSION CORD:
You can choose to put the baby unit onto a surface by folding out the table
stand or you can suspend the baby unit using a suspension cord (not
included).
3.4 PLACEMENT TIPS:
•
Do NOT place the baby-unit in bed
with the baby, maintain a distance of
1 to 2 meters between the baby and
the baby-unit.
•
MAKE SURE THE BABY CANNOT
TOUCH THE ADAPTOR CABLE.
•
Do not expose the baby-unit or
parent-unit to direct sunlight or humid
areas. This baby intercom is not
water-proof, penetrating moisture can
cause damage to the electronics.
Summary of Contents for DBX-62
Page 1: ...MODE D EMPLOI USER MANUAL GEBRUIKSAANWIJZING GEBRAUCHSANLEITUNG DBX 62 DBX 63 ...
Page 15: ...15 ...
Page 29: ...29 ...
Page 43: ...43 ...
