Using the stop watch
In the stop watch mode there are some strokes flashing.
This is only for animation and has no relevance.
To use the stop watch function, please follow the steps below:
1.
While in time mode, press MODE once to change to
the stop watch display.
For simple time:
1.
Press START/STOP to start counting.
2.
Press START/STOP again to stop counting.
Pressing START/STOP again will continue the counting.
3.
Press START/STOP to stop the counting and then press
SPLIT/RESET
to reset the time to 0.
4.
Press MODE
to return to time mode.
For split time (2 times) while in stop watch mode:
1.
Press START/STOP
to start counting.
2.
Press SPLIT/RESET to split the time.
3.
Press SPLIT/RESET again to see the continuing counting time.
4.
Press SPLIT/RESET again to split the time.
Repeat as often as needed. While time is running stop the
stop watch by pressing the START/STOP button and then
press SPLIT/RESET to reset the time to 0.
5.
Press MODE to return to time mode.
For finish line (2 times) while in stop watch mode:
1.
Press START/STOP to start counting.
2.
Press SPLIT/RESET to finish person 1 (display will show time
for person 1).
3.
Press START/STOP to finish person 2 (display will STILL show
time for person 1).
4.
Press SPLIT/RESET to show finish time for person 2 on the
display.
5.
Press SPLIT/RESET to reset stop watch mode to 0.
6.
Press MODE
to return to time mode.
Changing the battery
To change the battery, proceed as follows:
1.
Unscrew the five battery compartment screws on the
back cover of the stop watch using a screwdriver. (see fig. B).
2.
Open the battery compartment
and insert a new
battery 1 x 1.5 V
4 µA AG13 with the plus
polarity (+) facing upwards and screw the cover back on.
− If the display shows irregular symbols please take the battery
out and reinsert it.
Cleaning
Risk of damage!
Improper cleaning may damage the stop watch.
− Do not use any aggressive cleaners, sharp or metallic
cleaning utensils such as knives or similar. They could damage
the surfaces.
− Clean the stop watch with a soft, damp cloth.
Technical data
Model:
AA7-SW-5A, AA7-SW-5B,
AA7-SW-5C, AA7-SW-5D
Battery:
1 x 1.5 V
4 µA AG13
Article number:
55950
EAN-Code:
26288888
Disposal
Disposing of the packaging
Dispose of the packaging separated into single type materials. Dispose
of cardboard and carton as waste paper and foils via the recyclable
material collection service.
Disposing of old devices
Old devices must not be disposed of with household waste!
Should the stop watch no longer be capable of being used
at some point in time, dispose of it in accordance with the
regulations in force in your federal state or country. This
ensures that old appliances are recycled in a professional
manner and also rules out negative consequences for the
environment.
Batteries and rechargeable batteries must not be
disposed of with household waste!
As the end user you are required by law to bring all batteries
and rechargeable batteries, regardless whether they contain
harmful substances* or not, to a collection point run by the
communal authority or borough or to a retailer, so that they can be
disposed of in an environmentally friendly manner.
*labelled with: Cd = cadmium,
Hg = mercury, Pb = lead
Stop watch
Warranty Details
The product is guaranteed to be free from defects in
workmanship and parts for a period of 24 months from the date
of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or
refunded at our discretion. The benefits conferred by this
warranty are in addition to all rights and remedies in respect of
the product that the consumer has under the Competition and
Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure.
AFTER SALES SUPPORT
1800 823 104
Toll-free hotline
Repair and Refurbished
Goods or Parts Notice
Unfortunately, from time to time, faulty products are
manufactured which need to be returned to the supplier for
repair.
Please be aware that if your product is capable of retaining
user-generated data (such as files stored on a computer hard
drive, telephone numbers stored on a mobile telephone, songs
stored on a portable media player, games saved on a games
console or files stored on a USB memory stick) during the
process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending
the product for repair.
You should also be aware that rather than repairing goods, we
may replace them with refurbished goods of the same type or
use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements
are only used where they meet ALDI’s stringent quality
specifications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on 1800 823 104 or write to us at:
KRIPPL WATCHES
Reply Paid 85139, Level 29, Chifley Tower, 2 Chifley Square,
Sydney NSW 2000
Telephone: 1800 823 104 (Operating Hours: Mon-Fri: 08:30 AM
to 06:00 PM)
E-Mail: [email protected],
:
www.produktservice.info
AFTER SALES SUPPORT
1800 823 1800 823 104
Toll-free hotline
