background image

Safety

9

Only use the paper shredder in indoor areas.

Safety

Proper use

The paper shredder is only designed for cutting paper. It is only intended for private 

use and not suitable for commercial purposes.
Only use the paper shredder as described in this user manual. Using it in any other 

way is deemed improper and may result in damage to property or even personal 

injury. The paper shredder is not a children’s toy.
The manufacturer or vendor cannot be held liable for damages incurred through 

improper or incorrect use.

Safety notes

 WARNING!

Risk of electric shock! 

A faulty electrical installation or excessive line voltage may result in 

an electric shock or a short circuit.

 

− Only connect the paper shredder in indoor areas and only to a 

properly installed AC 240 V socket with a protective conductor.

 

− Only connect the paper shredder to an easily accessible socket 

so that you can quickly disconnect it from the power supply in 

case of a failure.

 

− Do not operate the paper shredder if it is visibly damaged or if 

the power cable or power plug is defective.

 

− If the power cable of the paper shredder is damaged, the 

manufacturer, its customer service team or a person with 

similar qualifications must replace it.

Summary of Contents for MA 501-17-B






















Reviews: