Operation
19
6. Place the housing of the spotlight onto the rear panel.
7. Fasten the housing on the rear panel by screwing the fixing
screw tight.
Mounting the solar panel
1. Choose a suitable surface for installation (see chapter
“Choosing an installation location”).
2. Hold the wall bracket
10
on the installation surface and
mark the three locations for fastening. Use a spirit level if
necessary.
3. Choose mounting materials which are suitable for the
installation surface. The supplied screws
13
and dowels
14
are suitable for concrete and brickwork.
4. Screw the wall bracket into the locations for fastening
according to the properties of the installation surface.
Do not apply excessive force in the process.
5. Completely unfold the charging cable and insert the plug
11
into the charging slot
5
on the housing.
Operation
Choosing a sensor area
You can configure the sensor area by turning the motion sensor
housing. The motion sensor housing can be turned by 90°. The
sensor angle of approx. 140° does not change in the process.
− Choose the required sensor area by turning the motion
sensor housing
3
.
