ALDI GLM32F User Manual Download Page 25

Page: 25 / 38

AFTER SALES SUPPORT

01904 727506

www.coreservice.co.uk

1200W Lawnmower

IRE

0124 751 50

IRE

device should be replaced.

3. Keep the cutting device sharp to ensure the best cutting

performance. Replace a worn or damaged cutting device with
a new one of the same type.

Replacing the blades
Always unplug the lawnmower before removing or refitting the
blades.
1. Loosen the bolt, turning it anticlockwise using a suitable

wrench and remove it together with the cutting device

(See

Fig R).

2. Replace the cutting device with a new one of the same type.
3. Reattach the cutting device onto the spindle, pay attention

to correct alignment. Tighten the bolt clockwise with 16
Nm min -- 20 Nm max. to ensure the safe operation of your
product.

4. Replace the cutting device after 50 hours mowing or 2 years

whichever comes first, regardless of condition. If the cutting
device is cracked or damaged, immediately replace it with a
new one.

5. Lubricate the cutting device after each use to prolong the

lifespan of the cutting device and product. Apply light
machine oil along the edge of the cutting device.

Maintenance

Summary of Contents for GLM32F







































Search results

Summary of Contents for GLM32F

Reviews:

Related manuals for GLM32F

Brands by name

Popular brands

ALDI GLM32F, User Manual

Search results

Summary of Contents for GLM32F

Reviews:

Related manuals for GLM32F

Brands by name

Popular brands