manualshive.com logo in svg

ALDI GLEKS 2440, User Manual

Share
Download
ALDI GLEKS 2440 User Manual Download Page 19

AFTER SALES SUPPORT

   

  0151 649 1500      

  1890 946244

 

 

  www.einhell.co.uk

18

Electric Impact Shredder – GLEKS 2440

Safety

DANGER!

p)    

Work only in good visibility. There is a risk of damage or 

injury if there is insufficient light in the working area.

DANGER!

q)  

 Always make sure of your footing while working. Risk of 

accident or injury due to slipping or tripping. 

DANGER!

r)  

 The guard is vital for your safety and for the safety of 

others, and it is also essential for the shredder to work 

correctly. Failure to observe this instruction will not only create 

a potential hazard of risk of electrocution, injury or damage to 

the shredder, it will also result in the loss of your rights under 

the warranty. 

s)    Keep the shredder away from other persons, particularly 

children and pets.

t)    Use the shredder only for the purpose specified in these 

instructions.

u)    

The mains voltage of your supply must be the same as the 

voltage specified on the appliance rating plate. Risk of fire 

or electrocution exists if this is not correct.

v)  

 Power cables used with the shredder must not be of a 

lighter duty class than HO7RN-F rubber insulated flexible 

cables according to DIN 57282 / VDE 0282 with a minimum 

cross sectional area of 1.5 mm

2

. Risk of fire or electrocution.

w)  

Plug connectors must be equipped with earthing contacts 

and the coupling must be rain-water protected. Risk of 

electrocution.

66926_3430345_11026_ug_inner.indd   18

22/03/2016   3:22 pm

Summary of Contents for GLEKS 2440
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands