manualshive.com logo in svg

ALDI GLEKS 2440, User Manual

Share
Download
ALDI GLEKS 2440 User Manual Download Page 10

AFTER SALES SUPPORT

   

  0151 649 1500      

  1890 946244

  www.einhell.co.uk

9

 

 

Electric Impact Shredder – GLEKS 2440

General information

–   Damage/Injury caused by not assembling the impact 

shredder correctly in line with the instructions.

–   Damage/Injury caused by trying to fit material which is 

too large, into the loading tunnel inlet which could jam 

the blade in the machine, or the material may then be 

catapulted away. 

–   Damage/Injury caused by feeding long pieces of material 

into the tunnel inlet which might whiplash if the material is 

still projecting out of the tunnel inlet as it is drawn into the 

machine.

–   Lung damage if no suitable protective dust mask is used.
–  Damage to hearing if no suitable ear protection is used.
–   Health damage caused by hand-arm vibrations if the 

equipment is used over a prolonged period.

The reprinting or reproduction by any other means, in whole or 

in part, of documentation and papers accompanying products 

is permitted only with the express consent of Einhell UK Ltd.

Subject to technical changes.

66926_3430345_11026_ug_inner.indd   9

22/03/2016   3:22 pm

Summary of Contents for GLEKS 2440
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands