manualshive.com logo in svg

ALDI Easy Home MS-201, User Manual, Page: 36 / 42

Share
Download
ALDI Easy Home MS-201 User Manual Download Page 36

Troubleshooting

36

Problem

Possible cause

Solution

The thread 

breaks.

The upper/bobbin thread is incor-

rectly threaded.

Re-thread the threads.

The upper/bobbin thread is 

snagged.

Re-thread the threads.

The upper thread tension is too 

high.

Relax the tension using the 

upper thread tensioner 

11

.

The spool of thread and/or 

bobbin 

3

 was positioned 

incorrectly.

Re-position the bobbin and/

or spool of thread.

The needle 

2

 is bent or blunt.

Change the needle.

The needle size/denier/fabric com-

bination is incorrect.

Change the needle and/or 

the thread.

An incorrect bobbin was used.

Only use the bobbins 

supplied. 

There is a loop 

in the seam.

The thread tension is incorrect.

Adjust the upper thread 

tension.

The presser foot 

21

 is not pressed 

down.

Press the presser foot le-

ver 

28

 down to lower the 

presser foot.

Stitches are 

skipped.

The needle was incorrectly 

inserted.

Re-insert the needle.

An unsuitable or defective needle 

is used.

Use another needle.

The needle size/denier/fabric com-

bination is incorrect.

Change the needle and/or 

the thread.

There are fibres or lint underneath 

the needle plate 

23

.

Clean the needle plate with 

a fine brush.

The thread guidance is incorrect.

Re-thread the threads.

The presser foot is not pressed 

down.

Lower the presser foot by low-

ering the presser foot lever. 

Summary of Contents for Easy Home MS-201











































Reviews:

No comments