manualshive.com logo in svg

ALDI Easy Home MS-201, User Manual, Page: 14 / 42

Share
Download
ALDI Easy Home MS-201 User Manual Download Page 14

First use

14

First use

Checking the product and package contents

NOTICE!

Risk of damage!

If you are not cautious when opening the packaging with a sharp 

knife or other pointed objects, you may quickly damage the sewing 

machine. 

 

− Be very careful when opening it.

1. Remove the sewing machine from the packaging.

2. Check to make sure that the delivery is complete (see 

Fig. A on page 2

).

3. Check the sewing machine and the individual parts for signs of damage. If any 

damage is evident, do not use the sewing machine. Contact the warrantor by fol-

lowing the instructions on the warranty card.

You can connect the sewing machine to the mains supply or operate it 

with batteries.

Preparing for battery operation

 WARNING!

Risk of explosion or fire!

If batteries are inserted upside down, they may be short-circuited 

or charged. This may result in overheating, explosion or fire.

 

− Make sure that the polarity is correct when inserting the bat-

tery.

Summary of Contents for Easy Home MS-201











































Reviews:

No comments