GB
IRE
Parcel Scale
Use
10
AFTER SALES SUPPORT
Mail: [email protected]
Model: GT-KSeds-01
09/2014
0800 / 328 6020
GB
00800 / 4467 5888
IRE
If
g
was set as a unit of measurement prior to activating the package
function, the unit of measurement automatically switches to
kg
.
To subsequently switch back to the g unit of measurement, press
MODE
twice.
Overload display
If O-Ld is shown in the display, the maximum load capacity has been
exceeded, see "Technical data" on page 13.
X
Remove the weighing goods from the scale.
Reset scale (RESET)
Reset the scale to its factory settings, if the values in the display are
obviously wrong.
X
Press the
RESET
button on the underside of the scale. After switching
on, you can continue weighing as usual.
Replacing batteries
If
LO
appears in the display, the inserted batteries need to be replaced with
new ones.
Attention - material damage
- Always replace all batteries at the same time.
- Do not use different types of batteries or used and new batteries
together.
- Pay attention to the disposal information, see page 13.
1. Slide the locking tab of the battery compartment lid on the underside of
the device downwards and remove the battery compartment lid.
2. Remove the old batteries.
3. Insert the supplied batteries, as shown on the base of the battery
compartment. Pay attention to the correct polarity (+/-) of the batteries.
4. Reinsert the battery compartment lid. Ensure that the lid audibly locks in.
Haushaltswaage 15kg UK.book Seite 10 Freitag, 9. Mai 2014 3:08 15