AFTER SALES SUPPORT
AUS
1800 13 1579
59
Troubleshooting
AUS
Problem
Possible cause
Solutions, tips
Workout can-
not be started.
The memory of
the GPS watch
is full; the work-
out time or lap
time exceeds 99
hours.
Transfer data
to the Crane
Connect app
and clear mem-
ory (see section
“RESET”).
“Memory full!”
message.
Memory full
Please make sure that the GPS watch does not automati-
cally clear the memory containing your data.
To do so, you must activate automatic clearing of the
memory after a data transfer under Settings before the
data is transferred from the GPS watch to the app.
If the memory of the watch is full, no more data can be
recorded and the time measurement for the workout
can no longer be started in workout or interval mode.
This means that the ST./STP key can no longer be
pressed. However, before the memory is full, the mes-
sage “Memory full!” will appear on the display of the
GPS watch. Once the workout time or the lap time is full
(99h), no further recording is possible either!
If you have further questions, you can also reach us at
the following address:
Krippl-Watches
Reply Paid 85139
Level 29, Chifley Tower
2 Chifley Square
Sydney NSW 2000
AUSTRALIA